You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Gooseneck * with angled front corners at approximately 45° and rear taper of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading Platform * Telescoping loading platform with rear taper of approximately 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approximately 2,850 x 970 x 400 mm (L x W x H) * Wheel recesses with square ladder rails approximately 15 x 15 mm, as well as widening in the lower area * A pair of fixed wheel recesses between the 1st and 2nd axles, approximately 1,610 x 970 x 400 mm (L x W x H) * Incl. 3-part removable galvanized covers over the wheel recesses (W approximately 670 mm), max. point load 5 t/piece. * Recess in the taper and extending into the loading platform to accommodate the excavator arm (approximately 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN) * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Two-part Steel Ramps * One pair of galvanized two-part steel ramps, approximately 2,750 + 1,400 x 800 mm, with hardwood flooring approximately 48 mm thick * Ramp with hydraulically extendable and foldable ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length when in the driving position. Kingpin Supports * JOST kingpin supports (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 t (approximate test load 50 t) Axles * BPW axles and suspension, 2 axles fixed, 1 axle steerable * Technical axle load: 12,000 kg each * Electro-magnetic reverse locking system via reverse gear and manually activated Air Suspension * with lifting and lowering valve. Axle tool Tires * 235/75 R 17.5 3PMS – manufacturer of our choice * TPMS: TPMS tire pressure monitoring system in accordance with ECE R 141 * Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Braking System * WABCO braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System * in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets * Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paint Finish * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection Rebybqoz Sh H Hs A Nxoch * Top coat with 2 layers of 2K topcoat, solid color in R The listing was translated automatically. Translation errors are possible. Intermediem vanzarea acestui utilaj industrial. La cerere, putem asigura transport specializat la destinatie, punere in functiune si pachete de garantie viitoare. Contact direct: Danut Stroie, Telefon / WhatsApp: +40 741 955 772, Email: masiniuneltedevanzare@gmail.com.